LQM converts signals:

• 4 x (100 Mbit/s to 2.5 Gbit/s) signals<-> 1 x OTU1.
• Implements the dual fed and selective receiving function or single fed and single receiving function on the WDM side according to the application scenario.

FE: Ethernet service at a rate of 125 Mbit/s or 12.5 Mbit/s

GE: Ethernet service at a rate of 1.25 Gbit/s

OTU1: OTN service at a rate of 2.67 Gbit/s

STM-1/OC-3: SDH/SONET service at a rate of 155.52 Mbit/s

STM-4/OC-12: SDH/SONET service at a rate of 622.08 Mbit/s

STM-16/OC-48: SDH/SONET service at a rate of 2.5 Gbit/s

FC100: SAN service at a rate of 1.06 Gbit/s

FC200: SAN service at a rate of 2.12 Gbit/s

FICON: SAN service at a rate of 1.06 Gbit/s

FICON Express: SAN service at a rate of 2.12 Gbit/s

DVB-ASI: Video service at a rate of 270 Mbit/s

ESCON: SAN service at a rate of 200 Mbit/s

FDDI: SAN service at a rate of 125 Mbit/s

• The encapsulation and mapping process is compliant with GDPS, ITU-T G.709.
• Supports PM and TCM functions for ODU1.
• Supports SM function for OTU1.

The board supports the LPT function only when the client-side service type is FE or GE.

Supports ITU-T G.709-compliant forward error correction (FEC) on the WDM side.

• Monitors BIP8 bytes (Poisson mode or Bursty mode) to help locate line failures.
• Monitors parameters such as the bias current, temperature, and optical power of the laser.
• Monitors OTN alarms and performance events.

• Supports the remote monitoring (RMON) of Ethernet services.

Supports the ALS function on the client side when client services are non-OTN services.

• Supports SW SNCP.
• Supports client 1+1 protection.
• Supports intra-board 1+1 protection.

GE(GFP-F): 1000M Full-Duplex, Auto-Negotiation

The value ranges from 1518 to 9600, in bytes. That is, the maximum size of the supported Jumbo frame is 9600 bytes.

Protocol or standard compliance

Protocols or standards (non-performance monitoring) with which transparently transmitted services comply

IEEE 802.3u

IEEE 802.3z

ITU-T G.707

ITU-T G.782

ITU-T G.783

GR-253-CORE Synchronous Optical Network (SONET) Transport Systems: Common Generic

NCITS FIBRE CHANNEL PHYSICAL INTERFACES (FC-PI)

NCITS FIBRE CHANNEL LINK SERVICES (FC-LS)

NCITS FIBRE CHANNEL FRAMING AND SIGNALING-2 (FC-FS-2)

NCITS FIBRE CHANNEL BACKBONE-3 (FC-BB-3)

NCITS FIBRE CHANNEL SWITCH FABRIC-3 (FC-SW-3)

NCITS FIBRE CHANNEL - PHYSICAL AND SIGNALING INTERFACE (FC-PH)

NCITS FIBRE CHANNEL SINGLE-BYTE COMMAND CODE SETS-2 MAPPING PROTOCOL (FC-SB-2)

SMPTE 292M Bit-Serial Digital Interface for High-Definition Television Systems

ETSI TR 101 891 Professional Interfaces: Guidelines for the implementation and usage of the DVB Asynchronous Serial Interface (ASI)

SMPTE 259M 10-Bit 4:2:2 Component and 4fsc Composite Digital Signals - Serial Digital Interface

NCITS SBCON Single-Byte Command Code Sets CONnection architecture (SBCON)

ANSI X3.139 Information Systems - Fiber Distributed Data Interface(FDDI) - Token Ring Media Access Control(MAC)

ANSI X3.148 Information Systems - Fiber Distributed Data Interface(FDDI) - Token Ring Physical Layer Protocol(PHY)

ANSI X3.166 Information Systems - Fiber Distributed Data Interface(FDDI) Physical Layer Medium Dependent(PDM)

Protocols or standards (performance monitoring) for processing services

ITU-T G.805

ITU-T G.806

ITU-T G.709

ITU-T G.872

ITU-T G.7710

ITU-T G.798

ITU-T G.874

ITU-T M.3100

ITU-T G.874.1

ITU-T G.875

ITU-T G.808.1

ITU-T G.841

ITU-T G.8201

ITU-T G.694.1

ITU-T G.694.2